We are hiring for this role on behalf of our client

Vehicle Repair Services Engineer

About Our Client

• Perform technical acceptance of incoming parts before goods receipt is approved: part number and supersession against the order, genuine label, condition by sample per line and 100% for high-voltage and electrical parts; segregate and photograph defective or wrong parts for the supplier claim.
• Check battery packs on receipt per serial: count, serial against the shipment list, casing and ports, impact / water / heat indicators, error codes and state of charge on the diagnostic tool; report damage within 24 hours.
• Perform the inbound vehicle check per VIN: visual and functional check, firmware, diagnostic read; pair battery packs to the vehicle and record pack serials; raise inbound defect claims with evidence within the OEM window.

• Perform PDI per VIN on the PDI request: walkaround, packs and serials, firmware, no active fault code, charge state, accessories, open recall and bulletins applied.
• Record the PDI pass reference per VIN; a vehicle does not leave the warehouse without it.
• Route PDI failures to the internal repair order and report the failure cause for quality data.

• Give tier-2 support to dealer technicians within the service level: diagnosis guidance, fault-code interpretation, repair method.
• Make the Gate 2 decision before high-voltage work, BCU replacement, repeat failures and repairs above the value threshold.
• Escalate tier-3 cases to the OEM technical channel with complete evidence; track the answer.

• Repair transit-damaged, PDI-failed and returned units on an internal repair order, with cost recorded by tier; return the unit to stock as new.
• Prepare, inspect and repair demo and test-ride units; keep demo and sales batteries separate.
• Retire demo units on inspection for the Aftersales Manager's decision.

• Build the monthly quality pack with the Service Admin: tier-3 cases, repeat faults, claims by part, fault-code frequency, transit-repair log.
• Draft technical service bulletins from field findings for the Aftersales Manager's approval.
• Propose parts-master corrections from repair findings.

• Perform battery-care visits to dealer stock on the schedule set by the Aftersales Manager; swap and log packs; report deviations.
• Support the Field Service & Training Specialist on site at dealers when rostered.
• Handle battery referral cases at points within the rule: the pack is never opened at a point.

• Three levels: Junior (inbound check, PDI, internal repair under supervision) · Senior (tier-2 support, Gate 2 decision) · Chief (tier-3 escalation to the OEM, technical bulletins, quality pack lead) — level set on hiring by experience and certification
• 3–6 years as a motorcycle, scooter or EV technician; electric two-wheeler or high-voltage experience strongly preferred
• Able to pass the OEM high-voltage and diagnostic-tool certification within the first months
• Comfortable with diagnostic software, firmware updates and structured checklists
• Valid motorcycle licence; willing to travel within the city and work on a roster between warehouse and dealers
• Basic written English for technical bulletins and OEM tickets; fluent Vietnamese
• Vocational or technical diploma in automotive or electrical engineering

• Precise and checklist-driven
• Records what he does
• Patient with dealer technicians
• Safety-conscious around high-voltage systems
• Hands-on and reliable